Starcraft 75 Posted April 29, 2018 Report Posted April 29, 2018 I have 2 White Diamond rods 2 piece 8'6", and they are very difficult to put together. Way to tight. Has anyone else had this problem and know of a solution? Appreciate any come back...
Shorthanded Posted May 13, 2018 Report Posted May 13, 2018 i have the same problem. looking for a solution as well.
bud Posted May 13, 2018 Report Posted May 13, 2018 fishkiller should be able to know of a solution he has atleast a dozen on his boat 1
Starcraft 75 Posted May 13, 2018 Author Report Posted May 13, 2018 Okuma told me to try some ferrule lubricant that they use for fly rods. Couldn't find it around here. I ended up sanding male end just enough to fit being very careful not to do too much. Very fine sandpaper. Good luck
Mitch K Posted June 27, 2018 Report Posted June 27, 2018 I have six of these guys and one of them almost gave am an aneurysm trying to get it apart. Finally got it apart and put some vacuum grease (silicone) on it and it helped a little. Might have to sand it down with really fine sandpaper like Starcraft 75 said.
Shorthanded Posted June 28, 2018 Report Posted June 28, 2018 deep six the ferrel lube...start sanding
Recommended Posts
You must be logged in to view content
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now